The Applications of Rapid Prototyping
DOI:
https://doi.org/10.56981/Keywords:
3D printer, Medical application, Rapid prototypingAbstract
Stem cell research has revolutionized our understanding of human development and regenerative medicine over the past decades [1]. These remarkable cells, characterized by their ability to self-renew and differentiate into specialized cell types, hold immense potential for treating previously incurable diseases and understanding developmental processes at the molecular level [2,3]. The field has witnessed remarkable progress since the first isolation of human embryonic stem cells in 1998, followed by the groundbreaking discovery of induced pluripotent stem cells in 2006 [4,5].
A new and incredibly promising technology is 3-Dimensional (3D) printing, which first emerged in the 1980s and has been continuously advancing since then. It is a distinct way of layer-by-layer material deposition that sets itself apart from other conventional modelling techniques through material molding and removal. Modelling by adding material, 3D printing can produce things with incredibly intricate geometries and even with previously unheard-of accuracy. It may be applied in a variety of fields, including aviation, the automobile industry, production, science, education, and medicine. Printing by adding material is a significant breakthrough for several writers in these latter domains of application. The spectrum of potential applications for 3D printing is enormous and highly promising, including modelling learning and training prototypes, producing tailored prostheses, and printing biological and functioning organs. In General, this article will focusing on the Major applications of 3D printers in education and medicine
References
1. Mishra A, Srivastava V. Biomaterials and 3D printing techniques used in the medical field. Journal of Medical Engineering & Technology. 2021 May 19;45(4):290-302.
2. Marouf NO, Mimoune N, Benchabane A, Khelef D, Kaidi R. 3d printer uses in veterinary medicine: a review. Veterinarska stanica. 2021;54(2):223-37.
3. Giansetto T. Intérêts de l'utilisation, à visée pédagogique et médicale, de l'impression en trois dimensions en ostéologie (Doctoral dissertation).
4. Preece D, Williams SB, Lam R, Weller R. “Let's get physical”: advantages of a physical model over 3D computer models and textbooks in learning imaging anatomy. Anatomical sciences education. 2013 Jul;6(4):216-24.
5. Hespel AM, Wilhite R, Hudson J. .invited review applications for 3d printers in veterinary medicine. Vet. Radiol. Ultrasound. 2014;55(4): 347-358.
6. Anna Suñol, Vicente Aige, Carles Morales, Marta López-Beltran, Alejandroluján Feliu-Pascual and Jordi Puig. Use of Three-Dimensional Printing Models for Veterinary Medical Education: Impact on learning how to identify canine vertebral fractures. J. Vet. Med. Edu. 2018; 46 (4): 523-532.
7. Evans B. Practical 3D printers: The science and art of 3D printing. Apress; 2012 Sep 25.
8. Peng H, Mankoff J, Hudson SE, McCann J. A layered fabric 3D printer for soft interactive objects. InProceedings of the 33rd Annual ACM Conference on Human Factors in Computing Systems 2015 Apr 18 (pp. 1789-1798).
9. Roberson DA, Espalin D, Wicker RB. 3D printer selection: A decision-making evaluation and ranking model. Virtual and Physical Prototyping. 2013 Sep 1;8(3):201-12.
10. Szulżyk-Cieplak J, Duda A, Sidor B. 3D printers–new possibilities in education. Advances in Science and Technology Research Journal. 2014;8(24):96-101.
11. Ford S, Minshall T. Invited review article: Where and how 3D printing is used in teaching and education. Additive Manufacturing. 2019 Jan 1;25:131-50.
12. Assante D, Cennamo GM, Placidi L. 3D Printing in Education: an European perspective. In2020 IEEE Global Engineering Education Conference (EDUCON) 2020 Apr 27 (pp. 1133-1138). IEEE.
13. AbouHashem Y, Dayal M, Savanah S, Štrkalj G. The application of 3D printing in anatomy education. Medical education online. 2015 Jan 1;20(1):29847.
14. Goudie C, Shanahan J and Gill A.. Investigating the Efficacy of Anatomical Silicone Models Developed from a 3D Printed Mold for Perineal Repair Suturing Simulation. Cureus. 2018;10(8): e3181.
15. Goudie C, Gill A, Shanahan J.. Development of an Anatomical Silicone Model for Simulation-based Medical Training of Obstetric Anal Sphincter Injury Repair in Bangladesh. Cureus. 2019; 11(1): e3991.
16. Lee S, Lee J, Lee A, Park N, Song S, Seo A, Lee H, Kim JI, Eom K. Augmented reality intravenous injection simulator based 3D medical imaging for veterinary medicine. The Veterinary Journal. 2013 May 1;196(2):197-202.
17. Boykin Sr GL. Measuring intravenous cannulation skills of practical nursing students using rubber mannequin intravenous training arms. Military medicine. 2014 Nov 1;179(11):1361.
18. Wilhite R, Wölfel I. 3D Printing for veterinary anatomy: An overview. Anatomia, histologia, embryologia. 2019 Nov;48(6):609-20.
19. Bustamante S, Bose S, Bishop P, Klatte R, Norris F. Novel application of rapid prototyping for simulation of bronchoscopic anatomy. Journal of cardiothoracic and vascular anesthesia. 2014 Aug 1;28(4):1122-5.
20. Chhabra S, Chopra S, Kataria R, Sinha VD. Use of 3D printer model to study vertebral artery anatomy and variations in developmental craniovertebral junction anomalies and as a preoperative tool—an institutional experience. Journal of Spine Surgery. 2017 Dec;3(4):572.
21. Li F, Liu C, Song X, Huan Y, Gao S and Jiang Z..Production of accurate skeletal models of domestic animals using three dimensional scanning and printing technology. Am. Assoc. Anatomists. 2018;11: 73-80.
22. AlcântaraLeite dos Reis D, Gouveia BLR, Júnior JCR and et al..Comparative assessment of anatomical details of thoracic limb bones of a horse to that of models produced via scanning and 3D printing. 3D Printing Med. 2019;5(13): 1-10.
23. Azer SA, Azer S. 3D anatomy models and impact on learning: a review of the quality of the literature. Health professions education. 2016 Dec 1;2(2):80-98.
24. Li F, Liu C, Song X, Huan Y, Gao S and Jiang Z.. Production of accurate skeletal models of domestic animals using three dimensional scanning and printing technology. Am. Assoc. Anatomists. 2019;11: 73-80.
25. Van Epps A, Huston D, Sherrill J, Alvar A and Bowen A.. How 3D Printers Support Teaching in Engineering. Technol.and Beyond. Bull. Assoc. Infor. Sci. Technol. 2015;42(1): 16-20.
26. Thomas CN, Mavrommatis S, Schroder LK, Cole PA. An overview of 3D printing and the orthopaedic application of patient-specific models in malunion surgery. Injury. 2021 Nov 18.
27. Cherkasskiy L, Caffrey JP, Szewczyk AF, Cory E, Bomar JD, Farnsworth CL, Jeffords M, Wenger DR, Sah RL, Upasani VV. Patient-specific 3D models aid planning for triplane proximal femoral osteotomy in slipped capital femoral epiphysis. Journal of Children's Orthopaedics. 2017 Apr;11(2):147-53.
28. Liaw CY, Guvendiren M. Current and emerging applications of 3D printing in medicine. Biofabrication. 2017 Jun 7;9(2):024102.
29. Kalaskar DM, editor. 3D printing in medicine. Woodhead Publishing; 2017 Apr 17.
30. Mishra S. Application of 3D printing in medicine. Indian heart journal. 2016 Jan;68(1):108.
31. Pugliese R, Beltrami B, Regondi S, Lunetta C. Polymeric biomaterials for 3D printing in medicine: An overview. Annals of 3D Printed Medicine. 2021 Jun 1;2:100011.
32. Curtis W, Dewey Emma, Davies Jennifer and L Bouma. Kyphosis and Kyphoscoliosis Associated with Congenital Malformations of the Thoracic Vertebral Bodies in Dogs. Vet. Clinics Small Anim. Pract. 2015; 46(2): 295-306.
33. B, Jung J, Park J, 33 Sm and Lee H.. 3D printing Bone Model for Surgical Planning of Corrective Osteotomy for treatment of medial patellar Luxation in a Dog. J. Vet. Clinics. 2016;33(6): 385- 388.
34. Oxley B and Behr S.. Stabilisation of a cranial cervical vertebral fracture using a 3D-printed patient-specific drill guide. J. Small Anim. Pract. 2016;57: 277-277.
35. A, Hayes G, Scrivani S, Campoy L, Fletcher D, Ash K, Oxford E and Moise NS. Use of 3D printer technology to facilitate surgical correction of a complex vascular anomaly with esophageal entrapment in a dog. J. Vet. Cardiol. 2017;19(2): 196-204.
36. Winer JN, Verstraete FJM, Cissell DD et al. (2017) The application of 3 dimensional printing for preoperative planning in oral and maxillofacial surgery in dogs and cats. Vet. Surg. 46: 942-951.
37. Ngan CG, Kapsa RM, Choong PF. Strategies for neural control of prosthetic limbs: from electrode interfacing to 3D printing. Materials. 2019 Jun 14;12(12):1927.
38. Ten Kate J, Smit G, Breedveld P. 3D-printed upper limb prostheses: a review. Disability and Rehabilitation: Assistive Technology. 2017 Apr 3;12(3):300-14.
39. Harrysson OLA, Marcellin-Little DJ and Horn TJ.Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery. J. Minerals. 2015;67: 647-654.
40. Gungor-Ozkerim PS, Inci I, Zhang YS, Khademhosseini A, Dokmeci MR. Bioinks for 3D bioprinting: an overview. Biomaterials science. 2018;6(5):915-46.
41. Gao C, Lu C, Jian Z, Zhang T, Chen Z, Zhu Q, Tai Z, Liu Y. 3D bioprinting for fabricating artificial skin tissue. Colloids and Surfaces B: Biointerfaces. 2021 Dec 1;208:112041.
42. Yamasaki A, Kunitomi Y, Murata D, Sunaga T, Kuramoto T, Sogawa T, Misumi K. Osteochondral regeneration using constructs of mesenchymal stem cells made by bio three‐dimensional printing in mini‐pigs. Journal of Orthopaedic Research®. 2019 Jun;37(6):1398-408.
43. Ozbolat IT, Yu Y. Bioprinting toward organ fabrication: challenges and future trends. IEEE Transactions on Biomedical Engineering. 2013 Jan 30;60(3):691-9.
44. Murphy SV, Atala A. 3D bioprinting of tissues and organs. Nature biotechnology. 2014 Aug;32(8):773-85.
45. Cui H, Nowicki M, Fisher JP, Zhang LG. 3D bioprinting for organ regeneration. Advanced healthcare materials. 2017 Jan;6(1):1601118.
46. Low CM, Morris JM, Matsumoto JS, Stokken JK, O'Brien EK, Choby G. Use of 3D-printed and 2D-illustrated international frontal sinus anatomy classification anatomic models for resident education. Otolaryngology-Head and Neck Surgery. 2019 Oct;161(4):705-13.
47. Wu CT, Yang YH, Chang YZ. Three-dimensional deep learning to automatically generate cranial implant geometry. Scientific reports. 2022 Feb 17;12(1):1-0.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 https://creativecommons.org/licenses/by/4.0/
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
